Now available for the new Audi RS3 (Type 8V) notchback sedan!

The success story of the Audi RS3 continues, and for the first time the sportiest compact model from Audi is now also available as notchback sedan. The revised RS3 performance with 400 hp also takes into account the latest generation of the KW coilover kits. Shortly after the official sales start of the new Audi A3 series top model, the KW Variant 3 is already available. The coilover kit is independently adjustable in compression and rebound damping, further increasing the handling characteristics of the RS. In addition, it offers the possibility of a continuous lowering between 10 – 35 mm. Find out more at http://ift.tt/2cILv2L

With a KW coilover kit it is easy to increase the handling and the driving dynamics of the new Audi RS3 notchback sedan. “With the Variant 3, we are primarily speaking to a target group that puts a great value on increased driving dynamics in combination with a continuous lowering,” says KW Product Manager Johannes Wacker. With our V3 suspension, drivers get the possibility to individually adjust the dampers. “If, for example, you install different rims than the wheel- / tire combinations offered by Audi, you will be able to further customize the damper setup, in addition to the possibility of a continuous lowering”, explains Johannes Wacker.

For example, the KW coilovers allow changing of the handling and driving comfort according to the individual driving demand via an integrated rebound adjustment with 16 exact clicks. Similar to KW suspension kits for motor sport, the rebound and compression stages can be separately adjusted. “So it is easy to directly take influence on the steering response, track stability, tire grip, and handling characteristics for safe controllability at the limit. With no other coilover kit for pure road use, you have such a great scope in regards of damper adjustment.” A total of twelve clicks are available for the compression stage, for example, in order to increase the tire grip and the road connection. In case, the RS3 notchback sedan is equipped with the optional adaptive dampers, a so-called cancellation kit for the series dampers as Plug & Play solution is part of the KW coilover kit Variant 3 delivery content.

During installation, the cancellation kit is connected with a compatible plug-in connection and with exception of the electronic damper control, all Audi assistance and dynamics systems remain active. In addition to the adjustable compression and rebound damping, preconfigured high speed compression valves are also used for the Variant 3. These high speed valves with their “blow-off characteristics” open additional bypass channels when driving over ground shafts or cross-joints, so that the wheels can dive in and the tires do not lose their road holding.

This is also one of the reasons why even at maximum lowering, a KW coilover kit allows such a sporty driving comfort in comparison to other suspensions. The tested lowering range of the Audi notchback-sedan is 10 and 35 mm on both axles but due to its lower center of gravity from the factory, the adjustment range for the RS3 with a KW V3 Coilover kit installed is equivalent to lowering a standard A3 notchback sedan up to 60mm. In this YouTube video, the founder and KW CEO explains the structure of the KW valve technology:

The post Now available for the new Audi RS3 (Type 8V) notchback sedan! appeared first on Audi Tuning Mag.

Source: http://ift.tt/1wYcbfp

Leave a Reply

Your email address will not be published.